inav

inav copied to clipboard

Speedybee F7 V3 servo fix

4

Hello INAV Support Team, I am writing to report an issue with servo outputs in INAV firmware version 8.0.1. After updating, my flight controller does not show all my servo...

0freechat001-sys

Building the new HAKRCH743 target, OSD cannot function properly

10

## Current Behavior I am currently working on building an INAV target for a HAKRC H743 flight controller. This target exists in Betaflight. However, after compiling and flashing the firmware,...

HAKRC8899

Inav 8.0.1 Unstable pitch and roll movements when GPS is enabled with 6 satellites

23

Hello everyone, I'm having a problem inav 8.0.1 with the accelerometer, which is shifting by several degrees on the pitch and roll axes. This issue occurs on two Matek F405...

Jerome26140

## Current Behavior iNav sees ELRS receiver RX telemetry power as 0w. My RX is BetaFPV SuperD 2.4 ELRS. Has 100mw rx telemetry power. ## Steps to Reproduce Setup FC...

kolabuzlu

Please consider adding DroneCAN/CANBus support to INAV

6

As more and more flight controllers start to ship with CANBus ports on them, many would welcome the opportunity to use CANBus for their builds. While the benefits for smaller,...

Painless360

How to configure and use an SPI optical flow sensor in INAV firmware?

4

Due to an oversight at work, I purchased a batch of PMW3901 optical flow sensors with SPI interface first. However, when attempting to use them, I found that INAV only...

surongfengSRF

Include cygwin1.dll in Windows Ci Build

2

### **User description** Windows SITL depends on cygwin1.dll. To always have the correct dll available and to get rid of the SITL binaries floating around in the configurator repro. ___...

Scavanger

Freeze airspeed estimation in autotune mode

1

## Current Behavior Currently when flying in autotune mode and performing big manuvers airspeed estimator starts to display weird values and it needs a lot of time after autotune being...

jaroszmm

Airspeed inaccurate using Matek Airspeed Sensor ASPD-4525 and INAV 8.0.1

15

## Current Behavior Airspeed is very noisy before the flight and during the flight, completely inaccurate. Always below ground speed no matter the heading. Brand new pitot tube. Unmodified. Clean....

prheli11

controlrate_profile = 3 does not set control profile to 3.

11

**PLEASE MAKE SURE YOU READ AND UNDERSTAND THE SOCIAL MEDIA SUPPORT CHANNELS. QUESTIONS ABOUT FLASHING, CONFIGURING, PILOTING MAY BE CLOSED WITHOUT FURTHER INTERACTION.** * [INAV Discord Server](https://discord.gg/peg2hhbYwN) * [INAV Official...

thespova