inav
inav copied to clipboard
INAV: Navigation-enabled flight control software
## Current Behavior If I start SITL on macOS with `--serialport` it hangs: ``` temp$ rm eeprom.bin temp$ /Applications/INAV\ Configurator.app/Contents/Resources/app/resources/sitl/macos/inav_SITL --serialuart=3 --serialport=/dev/tty.usbmodem2051359037561 --fcproxy INAV 8.0.1 SITL (171d00bb) [SYSTEM] Init... [SIM]...
Using the compass revealed the following problems: 1. Due to incorrect scaling most of compass data are lost magnetic field strength is about 0xEA6 lsb due to cancelling of low...
QMC5883L is discontinued. The substitute is QMC5883P, https://www.qstcorp.com/en_comp_prod/QMC5883P. https://github.com/ArduPilot/ardupilot/pull/25230
For example by this way  anyway this columns are unused and this allow to calibrate ACC as well.
**Desired Behavior** Add support for W25N02K 2Gbit/256Mbyte FLASH, a FLASH chip that enables the FC to have a larger on-board black box. **Who does this impact? Who is this for?**...
This pull requests adds support for ``$TARGET_NAME`` * [ ] Target complies with ``docs/policies/NEW_HARDWARE_POLICY.md`` The following items have been checked and confirmed working by an INAV developer on actual hardware:...
I am using Angle as my default mode on my fixed wing. In Horizon mode I am trying to make the transition from Angle to Acro less sensitive by changing...
Good morning. I'm trying to get a bidirectional esc to work using a Kakute f4, inav 7 in rover mode, but I can't start it. Gps ok, compass ok, but...
The airplane profile must define tilting servo channels and assign a value to these. Else the motors will point in the direction assigned in the transition mode.