inav

inav copied to clipboard

HGLRC F722 barometer not recognized, and INAV not allowing other barometer

2

HGLRC F722 has a built-in barometer. This is not recognized in INAV 5. I read on Betaflight site that HGLRC connect barometer on SPI bus but didn't configure it as...

magdyalgazaz

Docker build fail on macOS x86: /src dir dubious ownership

5

## Current Behavior Docker fails after setup. Suggestion doesn't fix it, nor does adding it to local `.git/configure`. ```bash *** Building targets [MATEKF722PX] fatal: detected dubious ownership in repository at...

petertorelli

Magnetometer not detected on INAV/FLYWOOF745NANO 5.0.0

1

## Current Behavior Getting Sensor status: MAG=UNAVAILABLE on INAV/FLYWOOF745NANO 5.0.0 and I2C Errors: 60 ## Steps to Reproduce 1. Connect quad FC to USB ## Expected behavior Magnetometer (FLYWOO GOKU...

irom77

Alternate way to enter OSD Menu

10

## Current Behavior Due to some mechanical limits I had to limit my servos in the output tab to 75% way. Everything works fine except entering the OSD menu via...

StuweFPV

Request of SpeedyBee F7V2 Wifi BLE chip disable during ARM

7

@DzikuVx Dear Pawel, Please kindly help for SpeedyBeeF7V2 board there was an internal wifi/ble chip. Can it be turned off during arm? To avoid 2.4Ghz interference. I requested this since...

abimaputra78

Initial support for CPP code

5

C++ provides better code structuring if used carefully

digitalentity

Add baro healthy function

10

This PR tries to fix https://github.com/iNavFlight/inav/issues/8224 If the pressure or temperature does not change after 2 seconds, the Barometer is marked as unhealthy. When the barometer was forced (through a...

JulioCesarMatias

iNav V5 - Barometer sanity check missing?

10

## Current Behavior Recently a [fix](https://github.com/iNavFlight/inav/issues/8080) was made for the [Matek GNSS M8Q-CAN](http://www.mateksys.com/?portfolio=m8q-can) gps, the barometer was not detected. Unfortunately this fix did not solve a problem: sometimes the barometer...

robustini

Support for SK6812 RGB+W LEDs

4

## Current Behavior Only WS2811 LEDs are supported. No RGB + W lighting exists. ## Desired Behavior I'm very interested in seeing SK6812 LED support added to iNav. For those...

jbienz

New Target for JHEMCU GHF405 PRO AIO

8

Hope that support for this device can be added. Currently supported by Betaflight: https://github.com/betaflight/unified-targets/blob/master/configs/default/JHEF-JHEF405PRO.config

scottrea123