inav
inav copied to clipboard
iNavFlight
INAV: Navigation-enabled flight control software
This board currently does not support MPU6500， and will cannot recognize BMI270 with this firmware. In addition, some error comments have been modified.
hello,please help to add new target 'AOCODARCF722MINI'. It has been tested and validated. it can upload it officially! thanks for your work!
Allow remapping of rc channels 1-8 for example TAER1234, AERT2134 or 3AER12T4. [https://github.com/iNavFlight/inav-configurator/pull/1560](url)
JHEMCU GF16 F405 Flight Controller Purchased a GF-16. INAV firmware version 5.0.0. I'm setting it up for now. There is a problem with OSD! The OSD works and is configured...
## Current Behavior When my quad was in acro mode, flying forwad at low speed, I activated RTH and the quad turned upside down in the air in its attempt...
The Kakute V2.3 is almost identical to V2, but introduces two additional motor outputs: M5 and M6. Tested and working: 2 servo outputs on quadcopter. I had to remove servo...
Hardware Matek f411-wse Tbs pro32 Nano INAV ver: 2.5.1 Issue. Pit mode does not activate automatically, even when lowest power until first arm is selected. Pit mode does activate correctly...
## Current Behavior If fw_level_pitch_trim is set at a certain value to maintain level flight in self level modes, the AHI will still follow the RAW sensor value. This leads...
When the pilot accidentally disarms in flight, the procedure to arm and resume normal flight is quite involved and easy to mess up when the pilot panics after suddenly seeing...
The current behaviour is that all OSD elements are static in the frame (with the exception of items like the text warnings). This allows us to layout a number OSD...
Metadata
Owner
Metadata
INAV: Navigation-enabled flight control software