inav

inav copied to clipboard

Disable stick commands if in CLI

2

This disabled stick commands when in CLI. Ideally they should be disabled all the time when connected to configurator. This would need a deeper look at MSP to see if...

MrD-RC

please help this target make the next build

Ultraexpert

There are plenty of flight controllers around now that use PINIO 1 and 2 internally for camera switching and switchable VTx power. This left no scope for user definable PINIO....

MrD-RC

NeutronRCH7BT is missing in the latest release

3

NeutronRCH7BT target binary is missing in the latest release. Can this be fixed?

DusKing1

TMOTOR F7 Pro - Gyro Problem - Target TMOTOR F7 V2

4

In Inav 5.0 or 5.1 when using Target TMOTOR F7 V2 after flashing the drone gets UPSIDE Down, i go to the Setup i can put ALL the Options CW...

Alexandre-Miguel

problem with baro INAV 5.0.0 - target MAMBAF405US_I2C

6

Same problem has been probably already issued, I attach here my description and data. Model already flown 3-4 times. I had already noticed a minor problem with altitude. This time...

Torchi

New target for IFlight Succex-E F7 / Mini

1

Unfortunately, the target is not yet available in the inav-configurator. Because I looked for it myself for a long time and then created one, I know how time-consuming it can...

Odin263

closes https://github.com/iNavFlight/inav/discussions/8372 https://www.foxeer.com/foxeer-reaper-aio-v2-f745-45a-bls-bluejay-2-6s-g-439

JulioCesarMatias

Add FOXEERF722V3 target variant

2

This PR adds a variant of FC Foxeer F722, in this case version V3. This FC has the UART6 too... But to release the UART6, we need to remap the...

JulioCesarMatias

Quad works well if SBUS FCB-RX comms are used but it does not reliably work if FCB-RX comms use F-Port.

1

In particular: - using F-Port the connection between FCB and RX does not always work at startup. - even when by chance it works, shortly after the connection goes, and...

Torchi