JamesH1978

Thank you for submitting a PR, please be aware that you need to sign off to accept the developer certificate of origin, please see point 3 in https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md#what-to-expect-in-a-review Thanks James

This module will likely not be included in mainline for the reasons given in the KIAUH documentation **Warning** This extension may have a high potential for abuse if not used...

Thank you for submitting a PR, please be aware that you need to sign off to accept the developer certificate of origin, please see point 3 in https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md#what-to-expect-in-a-review Thanks James

Thank you for the update, but as the docs state we need a name and an email address to fully sign off. Apart from that I cant see an issue,...

As mentioned by @Sineos , This PR changes an example kinematics file, with some of those changes quite dangerous for some printers wanting to use that file, mainly setting max_accel...

So the offsets are used to track back the nozzle position from the set points, which are manual absolute position for the probe over the point to give the actual...

Thank you for submitting a PR, pleas refer to point 3 in "What to expect in a review" in https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md and provide a signed off by line. Thanks James

Thank you for submitting a PR, pleas refer to point 3 in "What to expect in a review" in https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md and provide a signed off by line. Thanks James