inav

inav copied to clipboard

Require MULTI_BEEPS with RX_SET or beeper will not sound after GPS lock.

wchnflr

LED strip not working when load mixer on on iFlight BLITZ F435

2

**** ## Current Behavior LED strip stops working when load mixer on on iFlight BLITZ F435 after flashing firmware and mixer load. LED strip is Chimera7 side panels ## Steps...

Shurikas

stop motors on low throttle disabled but works on ALTHOLD STICKS

3

**PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING** Hi all, found weird behavior on my setup with inav 7.1.0. AIRMODE is ON. ANGEL mode alwais ON. My actual goal...

serhiy-uman

GPS Not working / Reset when upgraded to iNav 7

48

## Current Behavior Upgrading my Nano Talon to iNav 7 and GPS stops working. Upgraded my Nano Talon from 6.1.1 to 7.1.1 and restored DIFF and config as usual, no...

cpwilson

HDzero Video Feed appearing black when using MSP

1

## Current Behavior INAV 7.1.1 just flashed on the SPEEDYBEEF405WING with inav 7.1.1 configurator . no previous settings applied. Turn on my googles HDzero and video is fine no OSD...

Ombiflight

The output of F7 flight control motor is abnormal

6

## Current Behavior I used my own F722 flight control, configured the timer myself and then tested the local Ubuntu-compiled firmware, and there was a problem https://github.com/iNavFlight/inav/assets/89179705/41a42444-23f5-482c-8495-165d2ce2a255 ## Steps to...

YangChen1234

Multicopter waypoint mission flight smoothing

9

## Current Behavior I fly my multicopter to missions trying to get some nice videos. Unfortunately the multicopter jumps abruptly at every waypoint especially at terminal ones (eg waypoint 3...

cptX

Fixed althold issue in surface mode for multirotors

19

Some people, including me, were experiencing problems with maintaining altitude in surface mode using mtf-01 sensor. It seems that the problem was caused by high vibration levels which decreased the...

ultrazar

Programming Tab Documentation Update

8

## Current Behavior A few things I've noted that are not covered in the programming documentation. This "bug" report is mainly an issue of incomplete documentation, so it should be...

trailx

Updates to catch up with firmware 3.4

mmosca