inav

inav copied to clipboard

Adds flown loiter radius to programming logic. Works for fixed wing in hold modes. Should be useful to help set `nav_fw_loiter_radius `correctly.

breadoven

Update vtx_tramp.c for VTX

2

IRC Tramp RF Power Selection Enhancement. Increasing power levels up to 5000mV for VTX Foxeer Infinity 5W & VTX iFlight BLITZ 1600mW.

StenRC-FPV

[GPS] Fix message rate for newer ublox devices and add some extra debugging features

6

Fix the message configuration on m10 devices. Also, add extra gps info to status output ``` GPS: HW Version: UBLOX10 Proto: 34.09 Baud: 115200 SATS: 0 HDOP: 99.990 EPH :...

mmosca

Might as well try to use some of the gear I have for some line of sight flying. Probably will limit this to F7/H7, as it would need a half...

mmosca

Add a new target KakuteF4wing

5

KakuteF4wing is made smaller and lighter. It cover an area of 25x30mm. 1- 6 PWM channel are: 2 motor pads and 4 servo with THT 2- 5 serial ports, one...

jamming

Just testing and exploring crsfv3 rc packages

mmosca

Altitude hold not working properly.

13

**PLEASE MAKE SURE YOU READ AND UNDERSTAND THE SOCIAL MEDIA SUPPORT CHANNELS. QUESTIONS ABOUT FLASHING, CONFIGURING, PILOTING MAY BE CLOSED WITHOUT FURTHER INTERACTION.** * [INAV Discord Server](https://discord.gg/peg2hhbYwN) * [INAV Official...

Lalbabu2001

dual GPS support

2

feature request for INAV to support two GNSS modules connected to FC. so if one GPS fails, INAV will switch to the other working one. I think a user could...

anti-vaxxer

HGLRC M100-5883 GPS Compass Module // Barometer issue

1

## Current Behavior when connecting HGLRC M100-5883 GPS Compass Module, the barometer stay on red and gps and magnetometer also don't work at all ## Steps to Reproduce Steps to...

KingsKazuma

Show active battery profile in OSD

2

## Current Behavior In the current state, 7.1.1, it is not possible to display the active battery profile. There is not this possibility in the items available in the OSD...

Vins1417