sfeakes

I'm glad moving to a different protocol fix the issue. On your config/setup, the change will mean that changing the pump RPM/GPM will be a touch slower (maybe ~2 seconds),...

> @sfeakes to verify. When you state: > > "In aqualinkd.conf change the extra_device_id= line from 0x30 to one of the following 0x40, 0x41, 0x42 & 0x43, making sure not...

Thanks. This somewhat explains the problem. Rev I does not support iAqualink touch protocol, so that's why AqualinkD couldn't connect using that protocol in the extended ID. iAqualink touch protocol...

Only a few versions of PDA panels support 0x33 and it’s an ID that AqualinkD does NOT support on PDA mode. So please just use the PDA id 0x60 and...

This and a few other of your PR's failed testing against particular versions, I'm sorting through them figuring out why, will pull / modify / reject as appropiate.

I am sure this is EW11 and your wifi. I’ve done a lot of playing with EW11 on my own setup and have a lot of logs from someone else...

Can you post your` aqualinkd.conf` file. A lot will depend on settings you are using and I'd like to replicate as much as possible.

Thanks for that, I think I know where the problem lies. When iAqualink2 device is attached it changes the order of messages on certain panel revisions, normally this is not...

@sts098 Thanks for the information. The bug is fixed and will be posted in 2.4.1 (Dev 0.2) in a few days, and released with 2.4.1

> AqualinkD gets stuck at connecting to control panel at least 50% of the time. This might be the problem, can you provide some more details on what's happening. Usually...