sfeakes
sfeakes
Have you set the pump id in the config? If so, wait until you see GPM / RPM in the web ui, and then try to set it.
Can you send complete debug logs from startup to changing RPM/GPM, making sure you see the RPM/GPM in the UI after startup.
Thanks for the debug logs. I see the problem. The panel version you have `REV. O.2` is displaying the VSP information very differently to all the other panel versions I've...
I just pushed Version 2.3.2 that has support for this panel# and VSP. I have no way of testing this, so coded against your logs, let's hope this works. Below...
Stupid error on my behalf, Just updates 2.3.2, so please try again. Since it's same version# make sure you force the latest.
OK, pushed a change. please try again.
Glad we got a bit further, can you post debug log (attached is Info) of when you're trying to change RPM, that way I can see what's going on.
From your last set of logs, AqualinkD did not connect to the panel using the OneTouch protocol. Only the Allbutton and SerialAdapter protocols. Since OneTouch is the protocol that gives...
It looks like you have button 2 set to “Spa Mode” rather than “Spa” and the two are different / do different things. I can see why you have that,...
Looks like you sent commands in the following order "spa" "filter pump" "heater". AqualinkD did all those commands. (It simply follows the PDA menu, as that's all it can do...