Stuart Pittaway
Stuart Pittaway
@Cycor the controller shouldn't be crashing if you have the latest version of the software/code installed. I can't prevent the relays from switching/triggering when the ESP is rebooted (or powered...
Good idea, would have to check the CPU still performs okay with the reduced speed. This probably links into #120 perhaps we could use one of the buttons on the...
Hi David, care to share the information publicly on GITHUB?
My shunts use rs485 and Modbus protocol. If you look at the code there are two tasks, one to request some data from the shunt and another which receives it....
I can measure the current direction and hence calculate a total amo hour counter. This is obviously only measuring the portion of power in/out of the battery.
Yes, although the ina228 uses charge in columbs, which is then converted into energy and then current
I didn't purchase one in the end, but it does look very similar to the JUNKTEC shunt I've just finished integration with.
Thanks for the idea, I've not seen that before - the https://www.improv-wifi.com/ also looks like a neat solution.
Hi @anthonyevs normally this type of functionality would be found in the inverter/charger. My inverter/charger has a time of use mode for this exact purpose. Does yours have anything similar?...
Which inverter make/model do you have?