Stuart Pittaway
Stuart Pittaway
I'm trying to use the 1MB version of the emonesp on a sonoff basic wifi switch (no energy monitoring version), The code flashes and runs, I can connect to the...
If you have recently ordered a PCB using Gerber files between 17th May and 23rd May 2022, then there is likely to be issues with LCD and memory card working...
For future designs change the label on the PCB The term “Ground” on the cell module is not correct, it should be “Bat -”
What a relay is swapped from standard to pulse, the pulse doesn't switch the relay on or off until the controller is rebooted.
In relation to stuartpittaway/diyBMSv4#31 provide a way for the controller to stay in access point mode for offline applications
If you have an ESP8266 with only 4MB flash memory the controller will enter a loop when configuring the wifi setup - it appears like the password isn't stored (its...
Enable BOD detection and also write EEPROM values multiple times to prevent loss of EEPROM contents in BOD conditions
A two factor authentication reset request is currently pending approval not displayed on screen/page
When I try and login to blockchain wallet the underlying service returns the message "A two factor authentication reset request is currently pending approval in 13 days 19 hours 6...
Minor typo spelling mistakes corrected By submitting this pull request, I confirm that you can use, modify, copy, and redistribute this contribution, under the terms of your choice.
Hi, I've just upgraded to the latest OEM release (July 2020) and the SMA Solar code no longer runs. I originally wrote the code and its been running on my...