diyBMSv4ESP32
diyBMSv4ESP32 copied to clipboard
stuartpittaway
Comms speed improvement
Absolutely but I am on my way to Antigua for 2 weeks and havent bought my computer. Will put on github when I get back. It very impressive all the stuff you have done. How many of your boards have people had made?I used eurocircuits to make my boards just thr hole and assembled by me, it was too expensive to have smt made by them 200+ setup cost. The great thing was the design path from kicad was painless. I would much rather have them made smt. From what you say your guys are good and certainly cheap. Any comments on the design path? They dont take kicad direct I think.What I would really like to do is make a cellmonitor with BLE as the comms (to get rid of the wires) but having put a load of effort getting the attiny one working really well! I might make a BLE based current monitor using the ESP32 with the INA226. The ESPs are so insanely cheap!My current project is to interface Victron MPPT solar regs. Currently I use the VE.bus which is a serial protocol which they publish. But they dont publish the BLE protocol so I need reverse engineer it. There is some info on github but currently trying to sniff the packets using wireshark.DavidOn 15 Feb 2023, at 16:09, Stuart Pittaway @.***> wrote: Hi David, care to share the information publicly on GITHUB?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>