Stuart Pittaway

Hi Dirk, the new controller uses an ESP32 and that allows the extension of whats possible, including RS485 and CANBUS for direct reading from inverters/chargers. This is currently work in...

The controller is all new. Take a look at the openenergymonitor forum for picture and information. It's not released the the public just yet, still testing.

That's for submitting this. Diybms works very similar to other BMS systems with a balance function, such as Batrium. If the modules were limited to only balance one at a...

Thanks for taking the time to write this up! Is this just a different screen layout or do you expect the rules to operate differently as well? What priority is...

Thanks for leaving more detail. I under stand the problem of the timer example you give, as currently there is only two rules for that particular element. The existing rules...

Just to mention that module temperature monitoring is in the latest release

This will be caused by electrical interference, keep the cables short between modules (using twisted cables) and especially the last cable back to the controller - this is often the...

Hello, I agree, I've been working on a new controller design and that includes CAN BUS support. Do you have any good references to the LG RESU protocols?

The new controller will definately be an ESP32 - DEVKITC style. @atanisoft more than happy for you to help with the CAN stuff, I've not done much work on that...

> I'd suggest using TJA1051T/3 (C38695) which offers split voltage support (3v3 for MCU IO and 5v for CAN H/L). Thats annoying, I skipped that part as the JLC description...