Stuart Pittaway
Stuart Pittaway
> It seems to have restarted 3 times in a very short time. It seems to trigger a reboot if the WIFI connection is lost and restored within a second...
> the experimental firmware does not start on my esp, black screen. tried with two different esp32 and two different computers This isn't a complete flash image - if you...
I've not made any changes to the wifi stack - so a hidden SSID shouldn't be a problem. I've a log file from another user who has tested this firmware...
> Do you think an ESP32 with Ethernet port can solve the pb ? No idea, I don't have one and it would also need significant code changes to make...
> It only shares the Internet with a connected WiFi subscriber. It does not create an internal network that can be accessed. You can access the DIYBMS web interface directly...
> the diy bms needs a password too or at least a simple 4digit pin. Security isn't really possible on these sort of devices (ESP32) - at least not without...
Hi @red0909 been 3 weeks now, whats the feedback?
Hi @Bingo2023 what are you trying to achieve by using the chargers values? The BMS only really uses these values to control an external charger (via CANBUS etc.) or to...
But the whole point of the independent current sense on the BMS is to instruct the charger or inverter on what to do. If you are just going to feed...
The state of charge isn't a simple calculation, as you need to accurately measure the energy flow in realtime (thousands of samples per second) - does your charger perform this...