Stuart Pittaway
Stuart Pittaway
Does the deye support victron emulation? Does diybms report the discharge prevented rule? Can you try the force charge option on the charger screen.
The override state of charge is the force charge option. This should make the inverter charge the battery no matter what. You would need to add some debug code into...
Ok, so if the BMS is sending the correct data packets, could this be an inverter software bug or incompatibility? Is there any newer firmware available for it?
Really!! Wow that's good to know for other deye users
Hi, good to hear the system is working well. There isn't a rule related to state of charge - you may be able to use the "bank over voltage" rule...
Isn't this already possible by lowering the "S.o.C charge resume" to a very low value? Float is maintained for up to 720 minutes at the moment, but that should be...
The BMS will drop out of float mode if the soc is lower than the SOC resume value - ignoring the float timer. If we want to add days/hours then...
The code keeps track of how much film has been used and tightens up the slack in the reels. You could fit larger reels, would just need the arms lengthening
Yes the repo is correct. I believe some of the parts are toggled off/not visible in freecad - just need the visibility toggling back on. I've not touched this project...
> [@stuartpittaway](https://github.com/stuartpittaway) please check because the support for the 100x microscope that you see in the video does not exist in the project you posted, or at least I don't...