inav

inav copied to clipboard

Dual gyros locked

4

I've a Matek 722se with 2 gyros ..INAV says no gyro,no accelerometer..Betaflight says gyros shared lock..GUI shows no gyro or accelerometer ..Tried everything to unlock them and still no gyro/accelerometer..Any...

hoppey

VTOL Servo speed control

8

I uses a linear servo for my VTOL project, servo 4. Since the linear servo is slow, I need to control the servo speed. The linear servo moves from profile2(2000us)...

tohclin

Add support for PrincipIoT F7 FC

2

## Current Behavior PrincipIoT F7 FC isn't supported ## Desired Behavior FC is supported ## Suggested Solution This FC is already supported in BF under target `PRINCIPIOTF7` [link](https://github.com/betaflight/config/pull/549) We can...

lukas-principiot

Trying to update libraries and potentially unify some code around stm hal libraries.

mmosca

## Current Behavior Using JHEMCU GF30F405 and current master branch, after selecting MSP as receiver and using it, then switching back to SERIAL receiver and pressing "save and reboot", the...

xznhj8129

"Found no valid ESC configuration" BLHeliSuite32.

3

Having recently finished my first build I am met by a puzzling issue: ~ When powering the build, I have **always** been missing the final 2 motor start-up sequence beeps....

ADV-FPV

VTOL Improvements

2

## Current Behavior VTOL is working as intended and a great help when flying in the mountains; auto launch as a plane and return to land in a small space...

MiguelitoBeard

Inav target request for JHEMCU F405 NOXE V2

2

Hello, can we add inav support to this 20x20 F405 little board? it have BMi Gyro the betaflight target is JHEF405PRO.hex https://github.com/betaflight/unified-targets/blob/master/configs/default/JHEF-JHEF405PRO.config Thank you very much for help

torju01

Fixed wing - transition from autolaunch to loiter very violent

2

## Current Behavior 1. Activate autolaunch 2. arm 3. activate loiter 4. advance throttle 5. launch After tha launch phase is completed, model is banking violently (like a kick in...

mszulen

Beeper not working for SPEEDYBEEF405V4

1

## Current Behavior When I setup a button in modes to enable the beeper from my radio, it does not work in INAV but with the same quad if I...

wterreb