inav
inav copied to clipboard
iNavFlight
INAV: Navigation-enabled flight control software
Hi! Thank you for considering this pull request! I updated the LULU filter in the following ways: 1) Changed the indentation to K&R with 4 spaces instead of tabs. 2)...
In 2017, #1267 set the servo_lpf_hz value to 20hz. This LPF is running a biquad filter, and per the calculations I've found should be producing around 16mS of control delay...
## Current Behavior Inav currently can talk to certain SIM/sms modules to send telemetry and recieve commands through SMS messages. Having the same functinality by using a Mesthastic node instead...
## Current Behavior TPA attenuates PIDs based on throttle. This makes sense for quadcopters, but its not ideal for fixed wing. This was outlined originally in #1269. Despite being closed,...
## Current Behavior No OSD displayed on HDzero Ecobundle - GOKU GN405 Nano - sharkbyte VTX ## Steps to Reproduce No OSD displayed, even after reflashing everything, upload custom fonts...
Would be nice to change gimbal sensitivity during flight, the easiest way how to achieve it by programming framework. In settings.yaml is mentioned min max values as -16 to 15,...
## Current Behavior Using a RC Link system like [mLRS ](https://github.com/olliw42/mLRS) that support RC over MSP, there is currently no way to get receiver and link information to the OSD...
Current Behavior I'm using an AliExpress F4 flight controller with the ICM-42688 gyro. The flight controlle when flashed wth the OMNIBUSF4V3 does not show any gyro movement in inav. After...
Why can't the map of INAV ground station be loaded? How can I load the map?
Currently is gimbal sensitivity possible to set only in configuration tab in inav configurator, it's not possible to change sensitivity durring flight. My suggestion is make possible to change gimbal...
Metadata
Owner
Metadata
INAV: Navigation-enabled flight control software