inav

inav copied to clipboard

VSpd telemetry error accumulates in flight

9

## Current Behavior Platform: iNav FC mounted in a motor glider. VSpd telemetry parameter accumulates an error with a offset of up to +2m/s after about 30 minutes in the...

dingrgh

Speedybee F405 Wing App - does not connect to inav-configurator software

19

## Steps to Reproduce 1. Speedybee F405 Wing zusammengebaut und Batterie + ESC Kabel angelötet. 2. USB Verbinder mit FC und Laptop über USB-C verbunden 3. keine Fehler im Windows...

TomComm27

## Current Behavior I downloaded blackbox logs via msc and couldn't open them. I then took the sdcard out of the flight controller and inserted it directly into the laptop...

hughsaunders

Wrong Motor Resource Flywoo F405 Pro

1

## Current Behavior Only motor 2 and 1 are on the correct resource and are responding. Motors 3 and 4 are not responding, since on the wrong resource. ## Steps...

HelioEx

Update external logging

3

## Current Behavior The external logging seems to be outdated. The Openlog Artemis is able to log at a baud of 500,000 ## Desired Behavior support for the Openlog Artemis...

Hex-Davis

Add GEPRCF745_BT_HD target

6

Add GEPRCF745_BT_HD target, the first GEPRC FC to use the STM32F745.

YI-BOYANG

BLADE F7 45A AIO

3

## Current Behavior ## Desired Behavior New target for Inav ## Suggested Solution ## Who does this impact? Who is this for? ## Additional context

meor97

iNAV Target Request for iFlight Blitz F405 mini

1

Currently no target for iflght blitz f405 mini. Will this be in thr road map or can someone clever person point me in the direction of a target I can...

baboon9999

Unable to arm "throttle not low" even when set

11

I have a problem with the inav settings with "throttle not low"  this thirst min throttle  it wants max throttle

IonescuSergiuMihai

Fixed position for formation flight / inav radar

28

Hi, I don't like "flying" info on the screen about friends (inav radar), so I created proof of concept of fixed position info about the closest peer. It's new OSD...

error414