inav

inav copied to clipboard

On the existing Speedybee F405V4 flight controller, there isn't a way to use SmartPort for FrSky receivers with INAV. Using the resource mapping in Betaflight, it is possible to reassign...

Painless360

* [x] Msp messages * [ ] Use table on vtx_msp.c * [ ] Add cli commands * [ ] Add diff information * [ ] Submmit pr for hdzero...

mmosca

Some of us prefer to see wind speed in m/s, not in km/h. This PR does it: -m/s icon on OSD with corresponding speed in m/s -CLI parameter `osd_estimations_wind_mps` ,...

Yury-MonZon

Terrain data for showing AGL

4

Hi, I play with rangefinders, but rangefinders are expensive, inaccurately, or both. Solution could be implement into inav terrain data saved on SD card similar to ardupilot. https://terrain.ardupilot.org . Precise...

error414

Autolaunch topic with 7.0.0 compared to 6.1.1 (fixed Wing, Funjet)

7

## Current Behavior With 6.1.1 after some optimisations the autolaunch worked quite good with the fixed wing funjet Now I updated to 7.0.0 and the funjet rotates quite much. It´s...

druckgott

Better control over mannual alt control

2

## Current Behavior when you limit the vertical speed of quad because you don't want to utilise full throttle for safety reasons using advance tuning tab the quad adopt an...

Lalbabu2001

OSD flashes very slowly (Warning) when there are many OSD items added

25

My FC fw is 7.0.0-release When there are few osd items added, the flashing is very fast. When the added osd item exceeds a certain value, the flashing slows down...

ligenxxxx

Matek H743-WLITE flight controller crashes and stalls when EEPROM is saved without reboot on V7.0.0(stable)

9

**PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT** **** ## Current Behavior INAV runs properly on flight controller when configurator is connected until EEPROM is saved without a...

chucky-whiskers

GPS: Beidou should use B1, B1C as appropriate for concurrent Glonass

7

Beidou has two options, B1 or B1C. B1 is faster to first fix, but the M10 cannot use B1 concurrently with Glonass. Using B1C instead allows Beidou to be used...

sensei-hacker

Kakute H743-Wing with INAV 7.0.0: ledstrip does not work

5

I have got a Holybro Kakute H743-Wing FCB and the problem I report is that I have never seen ON any led of the strip. Everything else I am testing...

Torchi