Jetrell
Jetrell
> Do you have a copy of the uart documentation for the axis flying thermal camera. This has been the most difficult part of integrating these systems. T If you...
@cpwilson Try reducing `gps_auto_baud_max_supported = 115200.` Higher baud rates can cause problems on longer cable runs, if noise is being introduced into the RX and TX leads.
> but from my experience only on the F405WSE, which makes it difficult to pinpoint @cpwilson I powered up a Matek F405-WSE I have, running 7.1.1. I let it sit...
I was using UART 4 on the 6pin JST SH plug. True. You can place the GPS on any UART.. But preferably not UART 1 or 3 if the peripheral...