Jetrell
Jetrell
## Current Behavior Control over the `Adjustment` settings is defined by a `Slot`.  ## Desired Behavior Allow a Logic Condition to define if a specific `Adjustment` will operate or...
I have picked up that @DzikuVx is working on some form of Global Mixers for iNav. But I have not found much information on what these mixers will be able...
Hi guys. The configurator OSD symbol preview for Home Distance, has an extended possibility of character length. This prevents the Home Distance readout from being place any closer than 4...
The matter of DIFF/DUMP introduced settings errors, or locking up the compiler when loading, is not new, when the DIFF ALL has multiple `PID` and `Battery` Profiles applied.. This has...
Presently only analog video selections appear in the OSD tab. I think this is related to the OSD tab rebooting when an ALT page was selected, because its defaulting back...
When using the configurator master build to date. And using the master firmware post [2719472](https://github.com/iNavFlight/inav/commit/2719472787a269d7e443e47301ce4b878ef7f031) . I can not get any F405 controller I have tested, to access the _Tuning...
I'd experienced a problem when testing. It would cause the copter to burst into life within a short time after disarming. And in the worse case, it can harm the...
@breadoven I was out today running some tests with a culmination of the later merges. When I also decided to run a FS test. Normally I only do this with...