CuraEngine
CuraEngine copied to clipboard
Ultimaker
Powerful, fast and robust engine for converting 3D models into g-code instructions for 3D printers. It is part of the larger open source project Cura.
This is an issue originally mentioned in [the cura github page](https://github.com/Ultimaker/Cura/issues/8811), but I think it belongs here. I wanted to print a sort of pythagoras cup in which the external...
Use of "area" as the criterion for minimum infill area admits narrow, complex- or awkward-shaped small regions to get processed as infill, which can harm print time and quality. I...
When an overhang is just on the edge of the angle to be treated with overhang speed, some segments will have the speed reduction applied while others will not. Unless...
Hi, I'm trying to use curaEngine on a Mac, the one that comes packaged inside Cura UI contents. ./CuraEngine slice -v -j /[default definitions directory]/ultimaker_s3_MOD.def.json -o "[random directory]/slice_test/output_test.gcode" -e0 -l...
**Application Version** 4.13.1 **Steps to Reproduce** - Load model - Set infill to lightning - Change infill density in per model settings **Actual Results** top density not affected by per...
I first noticed this a year or two ago printing screw threads oriented in the XY plane: the top one or two layers would get severe stringing between them, and...
CuraEngine currently emits gcode to perform the initial bed and hotend heating sequentially, as a sequence (Marlin flavor gcode) of M140, M190, M104, M109 - set bed temp, wait for...
Tree supports are vastly better than traditional supports in terms of how they reach around the part to get to the buildplate, and usually also in terms of saving material...
**Application Version** Cura_SteamEngine version 4.8 **Platform** Linux Debian 11 **Qt** n/a **PyQt** n/a **Display Driver** n/a (NVIDIA Driver Version: 460.91.03 / GeForce RTX 2080 SUPER) **Steps to Reproduce** When calling...
Where two top/bottom lines next to each other touch they are presumable less strong and in the middle of either line. When alternating the top/bottom directions between 0* and 90*...