ES-Alexander
ES-Alexander
### Bug description Sometimes there are many ethernet-connected Ping360s being reported by the ping service (and accordingly shown in the Vehicle Setup page), even when only one is connected. Aaron...
### Bug description 1. Aerial barometers have their type displayed as "Freshwater Pressure", but should be something like "Internal Pressure" / "Aerial Pressure" - This seems to only be a...
Fixes #2548 ⚠️ UNTESTED ⚠️ Probably a good idea to make sure this works properly for both ethernet and USB-OTG connections before merging. If it's possible for the `domain_names` variable...
### Bug description [By default](https://github.com/bluerobotics/BlueOS/blob/master/core/services/beacon/default-settings.json#L12) the ethernet interface is accessible via `blueos.local`, `blueos-ethernet.local`, and `companion.local`. After configuring a custom mDNS hostname [the defaults get ignored and overwritten](https://github.com/bluerobotics/BlueOS/blob/master/core/services/beacon/main.py#L116), after which it's...
### Current behaviour Installing a docker image through the version-chooser or kraken is currently un-cancellable, which can be annoying if you start an installation and realise you don't actually need...
### Current behaviour The minimum horizontal margins of the "Manual upload" section card of the BlueOS Version page is wider than the other section cards on the same page, which...
### Current behaviour The [Video Streams](https://blueos.cloud/docs/blueos/1.1/advanced-usage/#video-streams) interface page is currently device-focused, which 1. can involve a lot of scrolling through devices to find active streams, 2. is poorly scalable to...
### Current behaviour Per [this forum topic](https://discuss.bluerobotics.com/t/nmea-not-working-in-blueos-1-2/16002) if the NMEA injector is set up without specifying a MAVLink `GPS_TYPE` in the autopilot parameters, the autopilot may not properly register the...
### Bug description If a PWM output
### Current behaviour Raspberry Pi Camera gets plugged into CSI port, but doesn't get detected, and isn't possible to stream to the surface. Caused by Debian Bullseye* switching things away...