Emanuel Feru
Emanuel Feru
@olemb thanks for the input. However if I do your last suggestion I get the following error: ```python >>> get_tempo(mid) Traceback (most recent call last): File "", line 1, in...
Hi @landrisan , The RPM can be outputed with more precision directly in fixed point (exactly as it is used internally). Meaning at your side you have to something like...
That of course you can do and should give you a more accurate speed measurement. I don't see reasons why it wouldn't work. The comands are send fast enough for...
The thing is it won't work out of the box, because of initial position. The sensor needs to indicate the degrees such that the controllers fires the phases correctly. So...
Also, yes I totally agree with @Candas1
Nice build! Yes it should work with your writing. Have a look at the wiki pages, all your questions are answered there.
There is RATE and FILTER in config.h to adjust the response to throttle during dynamic input changes. However if you want to adjust the torque curve (it should be more...
That can be. In the firmware there is a constant factor to convert from ADC reading to current, but that conversion is most probably not linear. So, it needs a...
What kind of micro do you have, can you provide picture?
Have you tried the ST dongle with another micro? I think you need to work it out by elimination: - confirm that dongle is ok - confirm that wiring is...