Emanuel Feru
Emanuel Feru
@cloidnerux First of all, very nice setup! I like it... It's very nice, especially with those offroad wheels ;) * Regarding the jittering issue. That is most probably from your...
Thank you for the info. I will add it to readme. How does your GD board looks like?
@mamert thanks for the input. For you which board works and which one not?
Strage, so you have gyro and accel but not DMP data. We need to debug further a bit, can you display the DEBUG output when you first power on the...
Not sure about the difference, but it could be a reason why is the DMP and angles not working. Because the quaternion is zero for you. I am thinking.. could...
Are you sure you have the same sideboards? Because I have a feeling that you have gen2 boards. If yes, it will not work with this firmware you have to...
@2com68 seems like you have the normal supported board. From what I understand you need the Hovercar variant. This works with using the mainboard and one sideboard connected to the...
I didn't test myself, but theory says the reverse should engage with a switch by double pressing as replacement to Brake pedal. However, if you want to be sure you...
We know that there is an issue running the DMP on MPU-6050A, running on MPU-6050 is ok. However i think your issue is in the Serial communication as I read...
I agree.. :) I am investigating it. However, for the moment my time is limited, so it goes slow.