John
This is very odd, especially since I can't reproduce this behavior. It seems like the ESP's aren't liking Arduino, and reboot in protest, although nothing has changed with the Arduino...
> So looking into this more I’m wondering if it’s an issue with gpio2 crashing/stalling spi > > AI mentions the following: GPIO2 is a boot-sensitive pin and often causes...
> I'd like to add to this, as a new user this completely ruined my day trying to set it up. The only thing that gave me the clue (when...
Going forward, everyone is instructed to load firmware from here: https://circuitsetup.github.io/ESPWebInstaller/ Which uses new (structured) config files from here: https://github.com/CircuitSetup/Expandable-6-Channel-ESP32-Energy-Meter/tree/master/Software/ESPHome
@AbrahamAV97, thanks for bringing this up. I'm sorry you've spent so much time on it. 1. I looked at this again and I'm not seeing how it could be ienergyT...
Going forward, firmware can be loaded from here: https://circuitsetup.github.io/ESPWebInstaller/ , and wifi credentials set This firmware is built from the new (structured) config files: https://github.com/CircuitSetup/Expandable-6-Channel-ESP32-Energy-Meter/tree/master/Software/ESPHome By default the main config...
> So from now on we should not do that anymore and instead use your installer to do updates? If you already have things setup in ESPHome builder there is...
I'm sorry it's giving you trouble. Is this with the keypad assembled, or when pressing the red button outside of the keypad housing, it does nothing?
Please open a support ticket on circuitsetup.us and we'll fix whatever is going on or get you a new control board.
I've seen this happen before when ESPHome has trouble connecting to Home Assistant. The signal strength may read high, but there could be a lot of interference/dropped packets. Are you...