John
"Klipper does not to my knowledge currently support input shaper tuning in other orientations" FYI, this can be done by using `axes_map` under [adxl345]. [See here.](https://www.klipper3d.org/Config_Reference.html#adxl345)
Is there a reason the OLED screen would flicker and turn off completely when the stepper motor is enabled? The screen never seems to stay on. It does stay on...
I needed to quickly play tones to emulate touch tone sounds on a keypad (the ESP32 cannot play 2 tones at the same time), so I loaded the DTMF sounds...
I'm trying to get 2 MP3s to play at the same time using the mixer, but they either come out very distorted or things crash when playing a second sound....
But what about 240V and 60Hz? _Originally posted by @netomx in https://github.com/CircuitSetup/Split-Single-Phase-Energy-Meter/issues/7#issuecomment-537653582_
Update to v2 of software. Includes a lot of new features and bug fixes, including: **New Functionality:** - Added alarm functionality (enable by holding down "1", disable by holding "2")...
With the audio mixer library being used, there is a way to play 2 sounds at once, but it currently does not work. It may be necessary to not play...
First of all. Thanks for all the work that you've done with this project, and for putting it up on here. I just uploaded a slightly reworked version of the...
One issue I've been having is SG90 motors burning out when tape gets bunched up and jammed. Usually when this happens the tape ends up going around the larger top...