John
This is now included with v2.7
> hi, > > i am using ATM90E32 IC, i am facing issue while reading Kwh from APenergyT register. Can anyone tell how to read Kwh and any calibration register...
> I'm thinking if it is possible to disable normal updates (with `update_interval: 0` ?) and then run script with timer using lambdas to call `ATM90E32Component::update()` for both ICs sequentially?...
> Hi, Thanks for your reply. I am not using this ESP HOME: https://esphome.io/components/sensor/atm90e32#active-energy I am using this example code of ATM90E32. https://github.com/CircuitSetup/ATM90E32 I am using the APenergyT register to...
The first thing to check is that everything is wired correctly. Do the meter and esp32 share a ground? Are the SPI wires connected on the pins specified in the...
Wait, what exactly did the 9V AC transformer burn out? It should only be plugged directly into the meter. When you power the ESP32 via micro USB, is the meter...
> When I power esp32 with USB, green led blinks. When I ordered the PCB resistor array was short so other LEDs did not blink because of the open path...
Sorry I did not get back to you sooner with this. You could make it work, but I would just get an ESP32 board to make it simpler. Regardless, all...
The 6 channel energy meters will be in stock this Thursday! @Azylog feel free to make your own! I thought about putting the module directly on the pcb, but this...