0crap
0crap
I noticed that as well, thx for the confirmation. No biggy at all, normal BF Lua works fine.
Would love to see a 2.4GHz LBT version as well. Parts are on order to make my first ExpressLRS 2.4G TX module. Thx!
> > Actually had to delete most of my comment again, since I just discovered ETSI EN 300 220 > This is a jungle... I guess I've got more reading...
> Gonna document my research into this here. > (these results are based on a perspective from Germany. Different regions might still have different regulations, since most EU stuff still...
Like breadoven says, there is no need to assign any AUX channels. RSSI and LQ works out of the box with iNav 5.0 Also try ExpressLRS v2.5.1 v3.0 is still...
Just enable LQ, RSSI, SNR in the OSD, nothing more to do. Failsafe has nothing to do with AUX channels, just works out of the box. For RX logging I...
The receiver will see if there is a failsafe or not. There is nothing you have to setup or do for it to work. You even do not have to...
> So Failsafe is set by the output INAV receives from the Rx not anything related to values being received via Aux channels. Correct.
Really, forget about the BBL. Try it over with setting up your OSD properly and use the OpenTX logs. Nothing is wrong with iNav and ELRS. Good luck.
> Why wrong ? INAV simply looks to see if it's receiving a valid signal from the RX based on certain criteria. If those criteria aren't met it decides the...