0crap
0crap
## Current Behavior After a roll in ACRO mode, with an airplane, the bounce back is horrible. ## Desired Behavior After a roll in ACRO, when the stick is returned...
As the title says. Very useful feature that is now hidden behind the CLI. An example as how this can look:  Thanks in advance for the time that goes...
To improve security of the OTGW, I have some suggestions that might help. - Fix issue #131 Go for a "simple" solution, like pressing the Wemos D1 reset button on...
### What happened? As the title says, my [IKEA switch](https://www.zigbee2mqtt.io/devices/E1743.html#ikea-e1743) is not visible on the Dashboard. ### What browsers are you seeing the problem on? Chrome ### Relevant stacktrace _No...
~~- Battery profiles do not update when switching~~ ~~- Settings validated checkmark stays red (even when known good diff all is applied)~~ - After full erase and flash it hangs...
On my Itho CVE-S ECO SP, with factory build-in humidity sensor, the fan goes automagically to High when it sees a jump in humidity. Perfectly fine. However, the Add-on does...
After updating a HM EPW6 receiver from v3.3.0 to v3.4.0 the captive portal often does not work. Most of my receivers are flashed using Betaflight Passthrough method. Except my pwm...
## Current Behavior After installing 3.5.0-RC2 I had a failsafe happening ## Steps to Reproduce Flash both TX and RX to 3.5.0-RC2 and go fly. ## Possible Solution (Not obligatory)...
Would it be an idea to switch off WiFi after arming the craft? (Switch off until next power cycle.) This to keep the noise floor as low as possible when...
## Current Behavior When flashing 8.0 RC2 firmware the Configurator (8.0 RC2) does not update the Baro Alt graph.  The Configurator 8.0 RC2 does show the Baro Alt...