TMCStepper

TMCStepper copied to clipboard

TMC5240 support

1

Is this library compatible (or planned) with TMC5240?

G-Pereira

The examples that are provided inside the https://github.com/teemuatlut/TMCStepper Repo have only a few examples showing the must rudimentary use of the library. After googling I found this library https://github.com/teemuatlut/TMC2208Stepper which...

StefanL38

I had a problem using TMCStepper from Marlin where Marlin controls a multiplexer to route the serial line to the appropriate stepper. This is similar in spirit to the SSwitch...

vector76

TMC2209 stops working after esphome update.

1

Hi, I used the tmc2209 successfully with an old esphome version and the following settings: external_components: source: github://glmnet/esphome@stepper-tmc2209 components: [tmc2209] in the custom component it installs cg.add_library("teemuatlut/TMCStepper", "0.7.1") now when...

nanobyte84

Current not setting up in TMC2209 on Arduino Uno using UART

1

I was working on Arduino Uno using TMC2209 to run a stepper motor and to control it's current using UART, but the current is not being set at all with...

kirito2908

I have made code with three tmc2209 stepper motor driver and Arduino mega i am using driver address to set all driver from one pin and there is one more...

Akshar062

By my understanding, it should be possible to use some of these AMS5147U chips i have purchased from AMS and soldered to DIP14 boards in order to provide encoder feedback...

Rincewind08

UNO R4 Compatibility?

2

Hi there Is this library compatible with the UNO R4? Many thanks John.

JohnHawkes

Hi, I am currently working on an IOT, the TMC2300 is not in the supported list. Is it possible to run the TMC2300 with this library? Or is there someone...

fabianmuehlberger

Can you share stallGuard example for TMC5160

1

I want to do sensorless homing in my project. But not able to how to do using this library. Thank you.

MarkEvens