Stuart Pittaway
Stuart Pittaway
I doubt the problem has gone away due to the power supply, just rather the "right" conditions haven't occurred for the problem to show.
Hi Dakoal, the monitor2.json output isn't really in a formal for transmitting over serial. We could output the MQTT data packets, thats in a JSON format.
I'll be looking at integration with Victro Cerbo using CANBUS as per #27
Hi @dakoal , yes platformIO and VSCode are still used to compile the code. The USB port on the ESP32 is used for outputting debug information, and you are free...
Global chip shortage is affecting everything - have you seen the price of ATTINY chips !
It's still there at /api/monitor2 This must be quite an update, the change was made a long time ago!!
You'll find that running the boards at 5k Comms speed helps with this a lot. As you mentioned there is significant voltage drop when the pwm is running.
Yes, I'll take a look at a simple two point control, but I was trying to get you a quicker improvement
Just picking up this issue again - using a on/off temperature limit rather than PWM should be easy to implement. I would suggest using the "Bypass over temperature" value as...
No not yet!