sfeakes
sfeakes
Can you try upgrading to the latest version of AqualinkD, and adding the following in aqualinkd.conf ` rs485_frame_delay = 4`. This will slow AqualinkD down a touch, just wondering if...
Can you post your aqualinkd.conf file. Also did you try the `rs485_frame_delay` posted above? If that doesn't work, can you try using `extended_device_id` with a one Touch ID and not...
That confirms what I thought it might be. It's a problem with the panel running two iAqualink Touch protocols + iAqualink (2.0 or 3.0), it probably can't handle all the...
I just posted a development update if you want to try that. This should reduce the load on the control panel using ID's 0x3?, and I believe (or hope) this...
What I see in your logs (For when you had extended is = 0x30) 1. 13:30:04 - start up 2. 13:32:32 - All light set to Fast Splash 3. 13:34:44...
Thanks for the logs. To get some more information can you do the following. Expand the “debug masks” option. Set “RS Serial Filter” to “0x33 0xa3” Turn on “RS Serial”...
Posting comment to keep this open, lots of color lights changes in V3.
I've been away for a few weeks and was not able to test this. But I just been able to and can't replicate the problem. Can you please post your...
Light mode 10 will limit to 0/25/50/75/100 (ie 25% increments). This will also expose the % in HA but not HomeKit since you can't set a % resolution in HomeKit....
That works ok for small increments like 5% (SWG will do this). But doesn't work well in HomeKit for large increments like 25%. It's a limitation of Apple's HomeKit app...