sfeakes

Thanks for all the information as you saw/noted your configuration was incorrect `extended_device_id` MUST be set for VSP to work correctly, without that you are only getting 1/2 the information...

Can you describe you setup a little better, ie control panel type / version etc. To my knowledge you can’t reassign a button, you can however assign a JVA to...

An RS4 combo has 4 circuits. (4 in RS4 is the # of circuits). The circuits on RS4 are Filter Pump, Aux1, Aux2, Aux3. On top you can also assign...

If you can post the outputs of the panel, and any online documentation that would be great. I have not seen this aux_v* before. I think I know how they...

Thanks very much for this, very helpful. I can that "Bubblers, Extra Aux & Cleaner" are turned on/off from the usual Devices page, but how do you turn Aux V26...

Thanks that’s very helpful. I will need some more information, but I’m going to make some changes to the next release to make it easier for you to capture that...

On the first issue, there are two options. 1. Run serial_logger from the AqualinkD management console. `http://aqualinkd-ip/aqmanager.html` 2. Run the container manually, and start either AqualinkD or serial_logger. Something like...

Good idea I just started that. https://github.com/sfeakes/AqualinkD/discussions/336

On RS panels the temp is displayed in F or C and aqualinkd will self configure, fixing all the issues you are seeing. The PDA panels do not have that,...

Looks like I found an easy way to do this no need to set the configuration, AqualinkD will work it out like it does in the RS panels, it should...