sfeakes
sfeakes
> Also, > > An observation/Question. The way to turn on the Heat Pump is not intuitive in the interface. In the Jandy app, I turn on "Heat Pump" and...
On the messages part, usually you would see `Filter Pump Pump 1 RPM: xxx` And the 1 needs to match the `button_01_pumpIndex = 1` so that’s why AqualinkD is complaining....
-1 means AqualinkD thinks the pump is off. That is probably because it’s not getting all the messages, like Watts and/or catching the control panel message with pump number. So...
Not with your setup. V2.3.7 fixed an issue with Pentair VSP and SWG, but I’ve never come across one with Jandy VSP and SWG. This could also be EW-11 issues,...
It’s probably the control panel that’s causing the SWG issue. If you haven’t tried 2.3.7 it’s worth a shot
2.3.8 is currently in dev, so not stable release. That wont be the cause of SWG issue, but may be on the pump display issue.
Can you provide some more detailed debug logs, so I can take a look at this in more detail and find a way to overcome this specific setup. Go to...
@ssorkin Release 2.3.8 is now released. It has some changes for Panel rev Yg. The pump should work as you can now label by name (rather than pump index as...
That's all information from AqualinkD UI making requests to the AqualinkD server. Since you have debug set and are not seeing anything from the serial port, that's your problem. From...
Glad it's working. The connections on RS485 are usually the problem.