sfeakes

> In the IOS Home.app (HomeKit) there is no way to turn on a dimmable switch without first setting the brightness. I meant HomeKit (The default iOS Home app). There...

Thanks for testing / letting me know the changes didn’t work. I’ll add some other changes in the next release.

@brownjd I think I've finally found the issue. Looks like Jandy Panel Rev T.2 (maybe others) has a bug for the light dimmers when using the RS serial protocol. AqualinkD...

Thanks, the code needs a LOT of cleanup, but wanted to see if this fixed it for you first. When it doesn't pick the last brightness, look in the log...

From my diagnosis The bug seems to be with the Jandy panel firmware rev T (maybe some others). So not surprising iAqualink has a similar issue. When this happens from...

lightmode=0 means AqualinkD will set the light color, not the control panel. Sounds like you want the control panel to set the light mode (I assume that's what you mean...

If you configure AqualinkD to Debug log, and log to file. Then start AqualinkD, give it a minute or two to set itself with control panel. Then try to program...

I went over the logs, and I can’t see anything where AqualinkD is interfering with the control panel programming the light, in-fact AqualinkD has not even seen the light change...

Since AqualinkD did not see the light even chance, it’s not related to MQTT. Just to confirm the below is what you are experiencing. AqualinkD not running, changing the light...

I noticed on log 3 & 4 you used AqualinkD to set the light and not iAqualink. Both times it was set to “Disco Tech” and the control panel thought...