marqs85

Yes, I was talking about total number of lines.

The chip is supposed to accept any polarity, but I wouldn't be too surprised if it didn't. [Here](https://videogameperfection.com/forums/topic/ossc-v1-xx-series-beta-firmware/) is the thread for the new beta fw.

Automatic position adjustment is a possibility, but as with other scalers its result would much rely on the picture content present during the adjustment (preferably triggered manually when there are...

So basically you'd like to have a "240p WS" scaler CRT output preset? It's certainly trivial to add even though I can't think of much 16:9 content that I'd run...

That's a good catch. I increased name size to 11 bytes which did not change the struct since VIC fits into a byte (struct is no more packed as in...

I thought about this possibility before publishing v1.08 and quickly compared 2 exported setting files which were equal before and after the change. Upon further inspection there was no saved...

The idea is definitely interesting and could be supported on OSSC, but robust decoding of multi-sample codes would require horizontal sampling rate and phase to be adjusted accurately to avoid...

This is not yet moved forward, unfortunately. I could create a test version for a configuration that already operates at 2x oversampling, but due to lack of suitable HW and...

Let me first create a test firmwared for you to try. If that doesn't work out, then test hardware with pattern generation could be useful.

A test firmware can be now downloaded [here](http://www.infocult.com/m/tmp/ossc_1.10-luma.bin). It is configured for C64 so the following settings should be applied: Input: AV2_RGsB (RCA from C64 connected to green Y jack)...