Mark
Mark
That's good idea!it maybe possible.I am considering how to add one fan on top of the motor driver and Pi.
you can check the En pin on the A4988, that should be low,and the motors can be locked. also check the GPIO40 connector between PRI and pandapi is connected well....
yeah,if the motor is locked that means En is working,if can not move probably the step pin has no input signal. so the step pin needs to be checked, and...
after click verify it will compile the source and make the pi_marlin. did you see some error log after you click the verify?
it seems that some of the file not update, "Marlin_main.cpp:14695:34: error: too many arguments to function ‘void step_motor_init(void ()())’", check or download again the pandapi folder, which pi do you...
I will check it later today
sorry for the out of update source for pi4, and now you can update the new github pandapi foler.
you can run as a4988 or tmc2208 model with TMC2130 first. niujl123 Email:[email protected] Signature is customized by Netease Mail Master On 01/22/2020 09:33, Klinenator wrote: Ok the update worked Now...
except the temperature and fans,all other pins are connected to RaspberryPi directly, not connected to onboard MCU, so that it cannot run Klipper. with RaspberryPI you can run/edit/compile marlin on...
> @markniu may you know what can cause that issue? I would be glad for any help. Hello, not sure what cause that, but we can open some debug message....