Mark
Mark
> > > There is no port necessary. > Marlin can run on linux machines. > https://twitter.com/MarlinFirmware/status/1388463841210667010?s=20 that's great! have not try that, looking forward it!
the U8glib source code has been contained in and will be auto compiled.
Did it reach the endstop and not stop while homing ?
Hi Saboiatota, thanks for correct this! BTW, I just upload the new version of Marlin2.0.4.4 for pi3,Marlin2x_pandapi3_20020325.zip
hello, V1.0 board needs to update new MCU firmware for PID autotune, https://github.com/markniu/PandaPi/tree/master/firmware https://github.com/markniu/PandaPi/wiki/How-to-flash-MCU-firmware
did you update the latest firmware and marlin code that I had updated the yesterday? how about the default Value of PID?or try to ''M303 C10 S210 '' instead of...
it seems that the RPI print out wrong PID , it print out some non text words,you can do the autotune one more time. I am testing and debug. set...
sorry for that bad temperature. so I do more test and fixed it today,but need more test,if you have time you can try to update this new firmware and marlin...
the I0.002 is too low, try I1, or increase P and D value. when the autotune failed, try again.did it failed everytime?
I find that the bed temperature on you board are not stable, because of the noise of the hardware or connect line,so I fixed it with the software,you can update...