Mark
Mark
> and can not find #include "driver/gpio.h" #include "driver/can.h" in this folder those dirver files are in the esp32 sdk folder,E.g in my side is C:\Users\xxx\.platformio\packages\[email protected]\tools\sdk\include\driver\driver this sdk will be...
> do you plan to support canbus XYZ motor ? how to modify marlin to other canbus ? no plan now, also seems not necessary to use the CAN BUS...
Hi,the reason of using stm32 is that the printer needs external ADC and more gpio control for FAN and heater at begin. use i2c ADC as you said is OK...
Schematic: https://github.com/markniu/PandaPi/tree/master/doc
Thanks for like my products and support! the shipping time from China to different countries are different with post,10 days to 30 days. if with express normally about 7 days,but...
Hi @AJMartel the exact version of Marlin is the latest released version 1.1.9 last year.
yes, Marlin2.0 has the HAL for different MCU
this is strange! you can set the drivers as standalone mode to see if it's uart problem,just put the MS1/MS2 jumpers on, and unplug the jumppers near the raspberry GPIO.
does this noise happens only in extruder port?
did you changed some configure? I will check it later today or tomorrow.