ltwin8
ltwin8
Feature request is not related to a problem. Would it be possible (since a Hortplatz doesn’t need all the settings a solderingiron does) to have a menu with for example...
Hello, i am trying to program a little "LED-Cube", battery powered, wirelessly charged and not accessible from outside. The MPU9250 and Atmega32u4 are already used, so not really easy to...
Hello, i am trying to program a little "LED-Cube", battery powered, wirelessly charged and not accessible from outside. The MPU9250 and Atmega32u4 are already used, so not really easy to...
Hello MCUdude, i would like to change the PWM Frequency for driving a special IC between 1 kHz (100 Hz up to 1.5 kHz are acceptable) and 3 kHz (2.5...
could one increase PWM resolution to more than 8bit in megacorex on the 4809? "The TCAn.PER register defines the PWM resolution. The minimum resolution is 2 bits (TCA.PER = 0x0002),...
Hello, i have an issue, the audio output of my mainboard (msi x370 gaming plus) has a permanent high pitched whine on the audio output, i use 5.1 surreound usind...
Has anyone experience in using the VESC as a controller for a pedal by wire system? available is a 3 phase BLDC with hall sensors. is there any advice on...
Is there any resource on how to enable specific Encoders (like Sin Cos that is already coded in) I would like to use SinCos encoder, I can set it in...
Hello, I would like to drive an Heinzmann Motor with the VESC, the setup for FOC worked, it already Spins. However I would like to use the Encoder build into...
Could you please clarify which PCB version is the one in the gerbers? I saw for example that https://github.com/westonb/little-bee-B1/blob/main/doc/images/little_bee_v4_circuit.jpg seems to be V4 (?) and switching the main current to...