henfri

Hello, it works in principle (direct connection to wemos). Thanks for your hint. The problem is, that as soon as I put the reader (S4A TF1) into Reader (opposed to...

Hello, the Wifi is ridiculous. You can only open/close the lock. I was expecting to be able to manage Cards / Fingerprints as well, as possible for other readers (e.g....

Wow thanks. That is something that the tech-support could not tell me. I will give it a try! How did you find out?

Hello, > @henfri : It is not documented properly in the TF1 S4A manual. You have to really long press the * key until you get a beep followed by...

Hello, I found something very concerning: I have learned several Fingers. When a finger is now pressed on the reader, it sends the UID - starting with 1 - to...

> Did anyone find issues with S4A (tf1) in reader mode with virtual card number output setting (menu 532#)? This mode is the only one that passes actual code entered...

Hello, so, you gave up to improve it, but you are still using it, right? What is your success-rate now? We are above 22°C here currently and the Device is...

Hello, I have this issue on two different boards. (Wemos and NodeMCU) It cannot be the boards - must be me then... On the Wemos, I get this: ``` [...

Hello, you are right. A reboot was neccessary. I think, it would be advisable to trigger that when the settings are saved. Regards, Hendrik

Hello, I also get no connection between my Ender and my S21. The Charging is no prerequisite for the connection, right? Best regards, Hendrik