gin66
gin66
Hello Speedjf37, thanks for the proposal. A brief look at the I2S-module gives me the impression, that an implementation would need to constantly write hundreds of kiloByte per second in...
Any port, which can be used as I2S-output can be instead connected to rmt-module, too. Thanks to esp32’s gpio- and io-matrix functionality.
Thanks for this detailed info. That IC demultiplexes the I2S-stream and in the individual bits are the respective signals for the stepper. This means, one I2S would be able to...
The current ramp generator does not support this. Eventually there will be a new one, which can support this feature, but there is no plan to start on implementation in...
Not sure if monitoring the state for coasting is too complicated. Sure, it is more convenient to have this as an option. A comparably straightforward implementation is to reduce the...
Sounds promising, that there is no compile failure. If you have the hardware, perhaps just give it a try? the sam port has been done by @clazarowitz. Maybe he has...
I have checked with ESP-IDF v5.4 on an esp32 and I could run up to 200kHz without issues. For my esp32c3 I just do not get the serial console via...
Appreciate your offer. I have lately received some other derivates S3 and C6, too. Just I have not found the time to test FastAccelStepper on these. P4 boards at AliExpress...
was a bit more work than that. Please try, if it works in hardware.