DanielGeA
DanielGeA
Maybe connecting the serial monitor to Tx, as with rotorflight, it sends telemetry without being polled. Just guessing because of its name, Tx.
Were you able to read any serial output from the esc? It seems that there is a handshake process.
I've created [xdfly branch](https://github.com/dgatf/msrc/tree/xdfly) for development on this esc. Select _Receiver protocol -> Smartport, ESC Protocol -> XDFLY_ and connect ESC telemetry line to GPIO5 and GND to RP2040 GND....
GY-521 MPU-6050 has an I2C interface. There is no need to use additional pins. It can be connected with other I2C sensors at GPIOs 8 & 9 AFAIK, acceleration values...
Yes, but it needs to be implemented. I've just ordered one GY-521 MPU-6050 module. I'll let you know when implemented.
I'm very sorry but this module export is prohibited now, Can you believe that?! I live in the caribbean, so I use a courier from Miami to RD. Note the...
Added support for MPU6050: - Available attitude and acceleration in: smartport, fport, fbus, jetiex - Available attitude in: crsf
It can be done. We need to read the communications between the esc and the receiver. In msrc_gui receiver protocol select _Serial monitor_ with the following parameters: - Baudrate: 100000...
> the SBUS2 is well documented Yes, I used that link to develop telemetry for SBUS2 protocol. But things get more complicated with an ESC talking to SBUS2, because probably...
Yes, you can use _ESC Protocol -> PWM_ to read rpm in PWM or pulses format. Note that I've just added support for pulses (not only PWM). You may need...