DanielGeA
DanielGeA
If you don't have a wifi module you can try with a serial monitor at the wifi signal wire and grounded. Msrc has a built in serial monitor at gpio...
Not sure if I understand. You ESC has two connectors: - The throttle wire, which contains the PWM signal from the receiver with a 20ms period. This signal is useless...
We need to read the telemetry packets from your esc to decode and implement the telemetry. I need a dump of the wifi signal to do this. What you will...
Implementing esc telemetry is not a big issue. Receivers protocols are. If you can read with serial monitor the telemetry packets, it wont be a big effort.
Unfortunately not. It seems that telemetry needs to be requested by the wifi module/app. This makes thinks harder. You can try with the module attached and the app requesting telemetry....
You get garbage because you enable the debug too soon. It isn't from the serial monitor. Don't bother too much with parity an stop bits for now. Even if they...
Please increase timeout to 10
Request telemetry 0xAA. Packet 14 bytes, big endian: - Byte 1, header 0x53 - Bytes 2&3, (temp + 3?) x100 - Bytes 4&5, current x10 - Bytes 6&7, 8950 to...
Maybe it is needed a start command. Can you get that debug without the wifi module? If not, enable the debug before powering the esc.
What is your bec voltage?