DanielGeA

CRFS protocol is serial at 420000. Telemetry has to be sent between frames. Seems easy to implement. I could implement it, if you can do some tests. I don't have...

MSRC will send only GPS and battery telemetry. There are no other sensors available in CRSF telemetry protocol. Only GPS and analog voltage and current can be sent. No vario,...

That's right. I'll include vario speed

I've created a branch for CRSF. I'll merge when tested Please download and flash from [https://github.com/dgatf/msrc/tree/crsf](url) Which board are you going to use?

Yes. Better the LC, as I have one LC around. Easier for me to check in case of issues Also arduino (atmega328, atmega32u4...) will work, if not connecting to GPS...

[crsf branch](https://github.com/dgatf/msrc/tree/crsf) is already configured with a simulated voltage sensor. You don't need to install the sensor yet. Only connect the crsf data to pin 1 for the teensy and...

> Hello, > I have ELRS and TBS systems. > I can help you for these tests. Thanks I though you were able to test it

No worries. When it is ready

FPort2 receivers (Archers) can not be configured as smartport as well? So an Archer receiver (like Archer R6) with servos connectors configured with smartport won't do the work as well?...

It can be done. Fport telemetry is similar to smartport. Though I'll need to implement sbus as well. I'll add to the todo list, without date