breadoven
breadoven
WP missions use a linear climb/descent between waypoints so the target altitude is the incrementing altitude required to achieve the linear flight path rather than just the altitude at the...
Are you sure there isn't some sort of RF interference in that area? That's a large GPS altitude error and also the plane doesn't seem to want to actually head...
Actually it would go to Timed Hold if `nav_wp_enforce_altitude `was active. I'm guessing it was related to this.
I notice `nav_wp_enforce_altitude `isn't enabled in the Diff. Was it enabled in the previous Log 00002 flight ? Hard to explain the WP Hold kicking in if it wasn't.
Always assumed the throw launch uses `nav_fw_launch_accel` given the setting states: "Forward acceleration threshold for bungee launch or **throw** launch" Seems that's not the case and instead it just looks...
Can you provide a Diff file rather than a Dump. And also a log would be useful. Sounds like it disarmed because it thought it had detected a landing although...
It's a bit difficult to work out what's wrong without a log. If you do test again then make sure `nav_disarm_on_landing `is set to OFF so it won't disarm if...
Surely the GPS messages are being received OK, no errors, it's just the GPS for some reason isn't resolving the satellites which sounds more like a configuration problem. Perhaps try...
What u-control messages do you get for the F411WSE running 7.1.1 ?
I think you need to double check the settings for the F411WSE you said worked fine with 7.1.1 and the settings for the F405WSE which doesn't. There must be some...