bdring
bdring
I added a W axis to my XYZ machine config. This created ABCUV to fill in the missing axes. I can move all axes except for the W ``` Grbl...
I did some more testing. I made a XYUW machine. I tested homing with various cycle configs. So far, all work fine.
Changing MAX_N_AXIS causes issues with saved values (coordinate systems). It seems to work when upgrading, but caused a crash when reverting. I had to force a reinstall of a clear...
Is the config file you posted the actual file or a $CD response? passthrough_mode should look more like this. passthrough_mode: 8e1
We have heard someone else requesting the opposite. They want a slower acceleration during G1/G2/G3 moves (under cutting load). Note: Some people use G0 for jogging. Does this affect both...
The parallel delta is just an experimental demo of kinematic. The [wiki page](http://wiki.fluidnc.com/en/features/kinematics/Parallel_Delta) should have set your expectations. I do not think I have a delta, I can probably simulate...
It is not working for me either. The stepper motor version was never fully completed and documented. The wiki clearly states that. The servo version does not need to homed...
what is the spin up time on the VFD?
- Was everything working before the upgrade to v4.0.0 pre2? - What command did you send to create there error? (like M3) - Where did you send the command from?
If it was working before with no hardware or config changes, there is likely a bug in the new release. v4.0.0 is current in pre release so people can catch...