bdring
bdring
 I made a controller to test the daisy chain SPI mode. I did a quick hack to the library to test the layout. It just loops 4 times inside...
I am trying a new method of daisy chaining with minimal impact on the library. I added an `axis_index` and `axis_count` variable to the TMCStepper object. They have defaults that...
The new method works for SPI write. I think there are still some issues with SPI read. I have a [fork of the TMCStepper](https://github.com/bdring/TMCStepper) library with my changes. I have...
Adding features that most people do not need adds to our long term development time support time. I suggest you just create a new spindle class called Kavo something on...
You have a switch that is active at startup. All switches except for the door switch should be momentary that activate when pushed. You can see what is active with...
Show the console text on the reset. I cannot test until late tomorrow.
I did a little testing and the control pins appear to be working as designed. Try sending the $message/level=debug command. It will show you all switch state changes. This will...
We need all the information you left out.
Add a picture of the wiring at both ends too.
Try using the terminal in the web installer. https://installer.fluidnc.com/ The start messages should look like this. http://wiki.fluidnc.com/en/support/troubleshooting_config_files#check-the-startup-messages